Orienta
ti
on
If the camera is being mounted upside down, se
tti
ng to upside down
will fl
ip
the video so it s
til
l plays back at the correct orienta
ti
on.
Timestamp
With this enabled, the date and
ti
me will be displayed on the video.
Circular Recording
With this enabled, when the storage get full, the camera will start to record
over older videos with the new recording, When disabled, the camera will
stop recording if the storage
fi
lls up.
Split File Time
This is the maximum length clip the unit can record. So if set to 15, and you
recorded for 1 hour, you would end up with 4
X
15 minute videos. This is also
the minimum
ti
me it will record for when triggered by mo
ti
on.
Mic
Enabled will record audio with your video, Disabled won’t record audio, only
video.
LED on/o
ff
When on, the record light on the side of the unit will
flas
h while recording.
When o
ff
, the unit will give no indica
ti
on it is recording.
Voice-Trigger Sensi
ti
vity
When set to high/medium/low, the unit will record when a sound is heard
by the microphone. High will be triggered by quieter sounds, and low will be
triggered by louder sounds. Disabled will not record based on sound.
Vib
rati
on-Trigger
Sen
siti
vity
When se
tti
ng to high/medium/low the unit will record when it, or whatever
it is in, is moved. High will be triggered by lighter movement, low is triggered
by harsher movement. Disabled will not record based on the device being
moved.
Vib
rati
on Standby Mode
Enables the camera to go to ‘sleep’ when not recording. This can ONLY be
used when vibra
ti
on trigger is being used. Mo
ti
on and sound will not wake
the camera up, will have to be physically moved to wake up.
Mo
ti
on-Trigger Sensi
ti
vity When set to high/medium/low, the camera will record when something
moves in front of the camera. High will be trigger by smaller, slower mo
ti
on,
low will be trigger by larger, faster mo
ti
on.
Disabled will not record based on mo
ti
on.
Note: If all of the Trigger op
tio
ns are set to “Disabled” then the camera will record con
tin
uously when
powered on.
Auto On/
Off
You can con
fi
gure the camera on turn on and o
ff
under certain cond
iti
ons,
or as
ti
med in the schedule.
Once you have con
fi
gured all of the se
tti
ngs, click the “Sync Se
tti
ngs to DVR” and safely remove the SPYZ15
from your PC. Make sure the record mode switch is on the cog symbol, not the eye or person running,
power the camera on, and it will record based on the se
tti
ngs you have selected.
If at
fi
rst you don’t succeed, have a play with the se
tti
ngs. You might have to alter the trigger sensi
ti
vi
ti
es
un
til
you
fi
nd one that works for you.
If you get stuck, feel free to give our technical team a call on +44 (0)117 325 2470 or email us at
info@spycame
r
acct
v
.com
