8
p i c l t d .c o m
bAT TErY INSTrUcT IoNs
The SPY
®
Model PJM operates on one 9 volt alkaline battery.
The battery compartment is located on the bottom side of the unit.
STEP 1:
Make sure the detector power switch is in the off position.
STEP 2:
The battery compartment is located on the bottom of the unit.
Using the notch on the bottom of the battery compartment lift up and
pull out to slide the battery tray out.
STEP 3:
Insert a new 9 volt battery into the battery tray and push the
battery tray firmly back into the unit making sure it locks into place.
If the battery discharges to a low level the Pocket JeepMeter display will
begin to flicker or will not come on, at this point the Pocket JeepMeter is
not properly measuring voltage and the battery should be changed with
a new 9 volt battery.
Low Battery
