Spy Tec G1W-C, Руководство пользователя

Страница: 8 / 17

Video Menu
To access the Video menus, if the device powers on and is not automatically in
Video mode, press the Mode button to the right of the screen until you are in
Video mode (shows a film strip icon to the top left of the screen) and then the
M button on top of the camera and press the M button twice for Setup.
Resolution
After selecting the Resolution option, navigate using the Up and Down buttons to
the left of the screen. Select the desired resolution: 1080FHD, 720P 60FPS, 720P
30FPS, WVGA or VGA and press the REC button for changes to take place.
Loop Recording
Loop recording will allow continual recording, as the camera records continually
over the previous footage. To disable loop recording, select the Loop Recording
option from the Menu and navigate using the Up and Down buttons to the left of
the screen to select Off and press the REC button. You may also set Loop recording
to 3 Minutes, 5 Minutes or 10 Minutes.
Wide Dynamic Range (WDR)
Allowing the camera to use WDR technology automatically adjusts lighting features
to enhance clarity and reduce glare. To access WDR settings, select the WDR option
from the Menu and navigate using the Up and Down buttons to the left of the
screen to select On or Off and press the REC button.
Exposure
The exposure settings allow you to adjust the picture quality by enabling a certain
amount of light to pass through a unit area of the lens. By adding more value, the
greater the amount of light to pass through the camera as it is filming or taking still
photos and likewise, the lesser the value will give lesser light to the capture. Settings
may be set higher for nighttime to reduce glare and lower for daytime to get similar
results. Settings for exposure are as follows: -2.0, -1.0, -1/3, -2/3, -4/3, -5/3, +0.0,
+5/3, +4/3, +2/3, +1/3, +1.0 and +2.0. To adjust exposure, select the Exposure option
from the Menu and navigate using the Up and Down buttons to the left of the
screen to select On or Off and press the REC button.
Motion Detection
By enabling motion detection, the camera will record as motion is sensed by the
lens. Using this feature will not permit continual recording unless motion is
continuous. To enable or disable motion detection, select the Motion Detection
option from the Menu and navigate using the Up and Down buttons to the left of
the screen to select On or Off and follow by pressing the REC button.
Spy Tec www.spytecinc.com Spy Tec www.spytecinc.com 8