manualshive.com logo in svg

SPX Radiodetection PCM+, Руководство по эксплуатации

Поделиться
Скачать
SPX Radiodetection PCM+ Скачать руководство пользователя страница 6

2 PCM

+

 Operation Manual

Eliminates the need for the operator to perform 
‘current spans’ and manual calculations to 
determine CP currents along the pipeline that require 
connection to the pipeline.

Is designed for the Pipeline Industry with guidance 
and support from Gas Industry leaders.

The PCM

+

 is one part of the Radiodetection Pipeline 

Product range, which also includes the Stray Current 
Mapper and Smart Interrupter.

PCM

+

 Transmitter

The PCM

+

 system’s specialized constant current high-

power transmitter allows for long range signal detection 
of up to 30km (20 miles). Significantly fewer pipeline 
connection points are needed thereby reducing the time 
required to evaluate a section of pipeline.

The transmitter has three operating modes that enable 
both distribution and transmission pipeline systems to be 
effectively mapped.

Connecting the PCM

+

 is straightforward, and the 

transmitter’s current reading LCD and power indicating 
LEDs help the operator to choose the best settings for 
the specific pipeline application.

For PCM

+

 Transmitter operating instructions, please refer 

to Section 2.

PCM

+

 Receiver

The handheld receiver unit is used to locate the pipeline, 
even in heavily congested areas. The receiver provides 
the operator with a measurement of depth current 
strength and direction of the near DC signal applied by 
the system’s transmitter.

The receiver makes the required calculations and 
instantaneously displays the results. This provides the 
operator with an improved method that accurately 
troubleshoots the CP system by pinpointing metallic 
contacts and locating areas of coating defects.

For PCM

+

 receiver operating instructions, please refer  

to Section 3.

•

•

•

Содержание Radiodetection PCM+
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды