SPX EF-7700 Скачать руководство пользователя страница 7

Страница: 7 / 8

MANUAL ENGLISH

Rev 1 date 26-04-11 RS 7-8

PROBLEM

POSSIBLE CAUSE

SOLUTION

The YELLOW LED
of the receiver does
not light up.

The receiver is not
well connected to
the power supply.

Incorrect power
voltage supply.

Check the
connection of the
power supply.

Check the power
voltage supply.

The GREEN LED on
the receiver lights
up, but the relays do
not react.

The transmitter code
has not been stored
in the receiver.

Program/teach-in the
transmitter code in
the receiver.

The GREEN LED in
the receiver does not
light up, while the
transmitter is
transmitting.

The battery in the
transmitter is empty.

The transmitter is
broken.

Replace the battery.

Contact your
supplier.

The GREEN LED in
the receiver lights
up, although the
transmitter is not
transmitting.

In the surrounding of
the receiver, another
transmitter is being
used on the same
frequency.

Contact your
supplier.

The LED of the
transmitter does not
light up when you
transmit.

The battery of the
transmitter is empty.
The transmitter is
broken.

Replace the battery.

Contact your
supplier.

The range of the
system is too small.

The battery in the
transmitter is almost
empty.

Replace the battery.

Please contact your supplier if you have tried out all solutions, but

your system still does not work properly.

Содержание EF-7700








