manualshive.com logo in svg

SPX FLOW HANKISON HF 12, Инструкция по эксплуатации, Страница: 9 / 12

Поделиться
Скачать
SPX FLOW HANKISON HF 12 Скачать руководство пользователя страница 9

7

3.  Remove bowl

a.  For models 12 through 28  - bayonet mount - 

push bowl up, turn bowl 1/8th turn to your left,  

and pull bowl straight down

b.  For models 32 through 48 - threaded bowls - 

unscrew bowl from head using hand, strap wrench 

or C spanner.

4.  Clean filter bowl

5.  Replace element 

a.  Replacing complete element 

1)  Pull off old element and discard.
2)  Make certain o-ring inside top of replacement 

element is in place and push element onto filter 

head. For Housing sizes 40 to 48, place element 

in bowl and secure with centering device.

NOTE: Grades 5, 3, and 1 - Do not  handle elements by  

outside foam cover.  Handle by  bottom end cap only.

b.  Grade 9 - replacing sleeve only 

1)  Pull element straight down to remove.
2)  Remove bolt and bottom cap and remove dis-

posable filter sleeve.

3)  Clean separator core with soap and water if 

necessary.

4)  Slide new filter sleeve over separator core and 

replace bottom cap and hand tighten bolt.

5)  Make certain o-ring inside top of element is in 

place and push element onto filter head.

6.  After making certain that o-ring inside top of bowl 

(and on bayonet mount heads, wave spring) are in 

place, reassemble bowl to head.

NOTE:  Make certain o-ring is generously lubricated.
NOTE:  Wave spring ends should be pointed down to pre-

vent the wave spring from interfering with reassembly.
NOTE:  Threaded bowl to head connection, generously 

lubricate threads with a high grade/temperature lubricant 

good for 150°F, 66°C.

C.  Auto Drain Mechanism

It is recommended that drain mechanism be replaced 

annually.

Separator Core

Replacement Sleeve

Bottom Cap

Bolt

Bowl o-ring

Element O-ring

Element

Bowl o-ring

Element O-ring

Grade 9 - Sleeve Replacement

All Grades - Element Replacement

Wave Spring

Models 12-28

Figure 3.1

Содержание HANKISON HF 12













Отзывы:

Нет отзывов