SPW VARIPROFILE VP-64, Руководство пользователя

Страница: 5 / 7

Removal instructions Torque settings for the prop-nut
DO NOT DISMANTLE THE PROPELLER UNIT (5)!
»
Remove the blade assembly (5) from the hub (1).
»
Therefore remove first the 3 off Set-Screws (8).
»
Now you can remove the Socket Screws (7). Take care
that the prop will not fall off after removing all Socket
Screws!
»
Dismount the blade assembly (5) from the hub (1).
»
Remove the Set-Screw (4) completely and screw into the
same hole (M8) the Counter Screw (9). Pay attention not
to set the prop nut with the counter screw!
»
now remove the prop nut (3) while blocking the hub with
one hand against the counter screw.
»
align the puller with the socket screws (7) of the hub (1)
and tighten (20 Nm / 15 Ft.lb).
»
do not tighten the set screws (8)!
»
tighten the extractor screw clockwise strongly, while hold-
ing by hand the counter screw (9).
»
you can now remove the hub from the shaft.
Standard – thread
M 14 x 2
UNC 1/2 “-13
40 Nm
30 ft/lb
M 16 x 2
BSW 5 / 8 “ – 11
UNC 5 / 8 “ - 11
60 Nm
45 ft/lb
M 16 x 2
Yanmar Saildrive
SD 20 & SD 31
60 Nm /
45 ft/lb
M 20 x 2,5
BSW 3 / 4 “ – 10
UNC 3 / 4 “ - 10
125 Nm
/ 95 ft/lb
UNC 7 / 8 “-9 160 Nm
115 ft/lb
M 24 x 3
BSW 1 “ - 8
UNC 1 “ - 8
210 Nm
155 ft/lb
M 27 x 3 315Nm
230 ft/lb
M 30 x 3,5
UNC 1 1/8” - 7
350 Nm
255 ft/lb
Fine – thread
M 14 x 1,5
BSF 1/2 “- 16
40 Nm
30 ft/lb
M 16 x 1,5
BSF 5 / 8 “ – 14
UNC 5 / 8 “ - 18
70 Nm
50 ft/lb
M 20 x 1,5
BSF 3 / 4 “ – 12
UNC 3 / 4 “ - 16
135 Nm
100 ft/lb
M 20 x 2
Yanmar Saildrive
SD 40 & SD 50
100 Nm /
75 ft/lb
M 24 x 2
BSF 1 “ - 10
UNF 1 “ - 12
225 Nm
165 ft/lb
M 30 x 2 430 Nm
315 ft/lb
SUBJECT TO TECHNICAL ALTERATIONS; ERRORS and MISPRINTS
Formular-Nr
.:51 Re
v.-Nr
.:09 08/07
8 9
1
1
3
3
7
4
5
6
9
2
8
1. Hub
2. Shaft
3. Nut
SW24 (VP-64)
or SW30 (VP-76)
4. Set-Screw M8x12 (VP-64)
or M8x16 (VP-76)
5. Blade assembly
6. Washer ø10
7. Socket Screws M8x25 (VP-64)
or M10x30 (VP-76)
8. Set-Screw M6x10 (VP-64)
or M8x12 (VP-76)
9. Counter Screw M8x120
Pay attention
not to set the
prop nut with the
counter screw
It is recommended to only use the special puller available from your VARIPROFILE dealer.