6
Setting the temperature Control
•
Adjustable temperature: 41°F to 68°F(5°C to 20°C)
•
Set the desired temperature by pressing the corresponding buttons,
to increase or
to
decrease. Each press is in 1-degree increment. Once released, set temperature will flash for
approximately 5 seconds then revert back to display the internal temperature.
•
To view your set temperature, press either the
or
button once and LED display will flash set
temperature for 5 seconds.
•
The appliance has the capability to display temperature in either Celsius or Fahrenheit. To
change the temperature scale, press and hold both
buttons simultaneously for approx. 3
seconds.
Note: The temperature inside may vary slightly depending on whether or not the interior bulb is ON or
OFF and where the bottles are located (upper/middle or lower section).
RUN
When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode is
currently in operation.
LOCK
If illuminated, indicates the control panel is locked.
NOTE:
•
If the unit is unplugged, turned off or experienced a power failure, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the appliance will not
start.
•
When you use the appliance for the first time, or restart after having been shut off for a long time,
there could be a few degrees variance between the set temperature and the displayed
temperature on the LED readout. This is normal and is due to the length of inactivity. Once the
unit runs for a few hours, everything will be back to normal.
•
When the “· ” is flickering, indicates the defrosting mode is currently in operation, it does not affect
the unit operation normally.
