SPT WA-P903E, Инструкция по эксплуатации

Страница: 8 / 28

6
Installation
Tools Needed
-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (optional, to shorten window adaptor for narrow windows)
Accessories
Your Window Installation Kit fits windows 67.5-123cm(26.5-48”) and can
be shortened for smaller windows.
Part Description
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 set
1 pc
Unit Adaptor
Window Slider Adaptor
Window Slider A
Window Slider B
Exhaust Hose
Bolt
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Security Bracket and 2 Screws
Drain Hose
Drain Hose Adaptor
(for Heating models only)
Quantity
Remote Controller
(2 AAA batteries)
Window Installation Kit
Step One: Preparing the Exhaust Hose assembly
Press window slider adaptor and unit adaptor onto the exhaust hose.
Clips on the adaptors will automatically clamp onto the exhaust hose.
Step Three: Preparing the Adjustable Window Slider
Depending on the size of your window, adjust slider kit accordingly. If
the window requires both pieces of the slider kit, adjust to needed
length and secure with bolt.
Window slider A Window slider B
Bolt
Step Two: Install the Exhaust hose assembly to the Unit
Align the hooks on the unit adaptor to the hole seat of the air outlet
(located on the back of the unit). Insert adaptor and slide hose assembly
downwards into the groove.
Hook
Hole Seat
Lower groove
adaptor
Make sure the adaptor is inserted into the lower
groove of the air outlet.
O
N /
O
F
F
T
E
M
P
S
HO
R
T
C
UT
T
IM
E
R
O
N T
IM
E
R
O
FF
M
O
D
E
FA
N
S
LE
E
P
SW
IN
G
L
ED
Unit adaptor Window slider
adaptor
Exhaust hose
Exhaust hose
assembly
Wall adaptor for through-the-wall installation
(Not included, option to purchase) Please
refer to page 8 for installation instructions.
Check all accessories are included in the package and please refer to the installation instructions
for their usage. Note: All illustrations in this manual are for explanation purposes only. Your air
conditioner may be slightly different, the actual shape shall prevail.
Note: If the window opening is less than the minimum length of the
slider kit, cut Slider A. Cut the solid end, DO NOT cut out the openings.