10
Press the SLEEP button, the Sleep
Light will be on after 10s, and all the left
lights will be off. In SLEEP mode, the
air-conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night. The set
temperature will automatically raise by 1
every 30-60 minutes and at most change six
times until the set temperature is 28
. And
every running time depends on the set
temperature.
4.
Sleep:
1. Turn the air conditioner on and off.
Power:
2. Press the COOL button to COOL mode.
Cool:
and :
3. Use these buttons on the control
panel and remote to increase or decrease the
Set Temperature or Timer. Temperature range:
61
~88
or 16
~31
.
1
4
5
6
3
3
7
8
10
9
2
When the unit is in ECO mode, the light
will turn on. In ECO mode, the unit will turn-off
once the room is cooled to the user set
temperature. The fan will also be off at this
point. The unit will turn back on when the room
temperature rises above the user set
temperature.Before the compressor stars, the fan
motor will keep running 10 minutes-stop 20
seconds-and again, to provide much more
comfortable feeling, and save the energy.
Press the Fan Only button to FAN
ONLY mode.
9.
10.
Eco:
Fan Only:
Press the FAN SPEED button to
choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
choose Hi, Med, Lo in FAN mode.
7.
Fan Speed:
To press the DISPLAY button, it can
switch off/on all lights or LED display.
8.
Display:
U
Timer Off:
T
Timer On:
W
Note:
It can be set to automatically turn off or on
in 0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below
10 hours and 1 hour increment for 10 hours or
above. The SET light will turn on while setting.
To cancel the setted function, press the TIMER
button again.
se these buttons on the control panel or
remote to set the timer.
he timed stop is programmed by
pressing the TIMER button. Set the rest time by
pressing the button with arrow up or down until the
rest time displayed is to your demand then press
TIMER button again.
hen the unit is off, press TIMER button
once, set the temperature with pressing the button
up or down. Press TIMER button a second time, set
the rest time with pressing the button up or down.
Press TIMER button a third time, confirm the setting,
then from the rest time to next automatical Switching-
on could be read on the display of the machine.
5.
Timer:
In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL,DRY or FAN).In this mode the fan speed
and the temperature are set automatically according
to the room temperature (tested by the temperature
sensor which is incorporated in the indoor unit.).
6.
Auto Mode:
Содержание WA-1223S
