- 4/12 -
Quick Release hook
Power cord
Lower Cord Retainer
ATTACHMENT ASSEMBLY
After the handle has been assembled to the body and the power cord has been
wrapped around the cord hooks, the attachment can be assembled.
1.
Place the wand in the right slot of the tool holder.
2.
Place the crevice tool in the left slot of the tool holder.
3.
Place the dusting brush into the brush clip.
HOW TO START
1.
Turn the quick release cord hook to either side and down to release the power
cord.
Quick release cord hook
2.
Release the power cord plug from the power cord and pull the cord off the
quick release cord hook. Check to be sure the power cord is still locked into
the locking notch in the quick release cord hook.
WARNING
Do not plug in if switch is in the ON position. Personal injury or damage
could result.
OPERATION INSTRUCTION
