UNIFIRE
Endangerment through spatter
During plasma cutting sparks, slag and hot metal are produced. The risk of burns and fire
exists! To avoid these endangerments the following has to be advised:
-
remove all potential flammable materials from cutting area, at least in a 10 m distance
-
cool down freshly cut material before handling
-
make fire extinguisher available in the cutting area
Handling of pressure cylinders
In some cases compressed gases are required for the plasma cutting process. To avoid
endangerments the following has to advised:
-
Place cylinders upright in secured position
-
Never use damaged cylinders, pressure reducers and armatures
-
Use pressure reducers only for the gas it is determined
-
Never lubricate pressure reducers with grease or oil
-
All parts coming in contact with oxygen must be free from oil and grease
-
When using oxygen and/or flammable gases the pressure reducer has to be equipped
with an explosive-proofed device (backfire-device)
-
Regularly check the gas hoses and other equipment for leaks etc.
-
Always follow regulation regarding gas equipment
11
