•
Leave the cap of the water tank loose. This will prevent the cap and gasket from sticking together
and prolong the life of the gasket.
TROUBLESHOOTING
1. Unit is not producing mist.
•
Check if unit is powered on.
•
Turn the mist intensity level higher (clockwise)
•
Verify the water tank is full.
•
If there is water in the tank, the water level in the base is too full. Unplug unit, remove
tank and pour out water in the base.
•
Check if water tank is properly placed onto the body.
2. Little to no mist
•
Verify the water level
•
There may be calcium and/or mineral buildup on the nebulizer, clean with
suggested solution
CARE & MAINTAINENCE
•
Turn off power and unplug unit before cleaning.
•
Never use a detergent or any cleaning chemicals to clean any part of the unit. Detergent
dissolved in the water supply can interfere with the mist output.
•
If water tank is extremely dirty, soak with a mild bleach and water solution and rinse clean. Never
use detergent.
•
Wipe the exterior of the body with a damp cloth.
•
Do not spray water or any liquid onto the control.
•
Never immerse the base in water or let water enter the air outlet or other openings.
•
Clean and rinse the water tank and mist nozzle with lukewarm water frequently to avoid mineral
build up, especially during the heating season.
•
Keep the nebulizer and water sensor free of mineral deposits. Remove water tank and empty the
reservoir. Clean the nebulizer and sensor with a soft brush (old toothbrush). Do not scrape the
nebulizer or water sensor. Do not clean with tools that have metal parts.
•
Leaving water to sit in the tank for more than a couple days may cause bacterial growth. Always
empty the tank if not planning to use for a few days.
TECHNICAL SPECIFICATIONS
Model
SU-2031 Polar Bear Humidifier
Input voltage
AC 120V~60Hz
Power consumption
21 W
Water tank capacity
2 L
6
