4
B. Blade Assembly
1. First, remove the following parts from the axle on the
motor head. Please remove before installing grilles:
Guard Lock Nut, Axle Sleeve and Lock Cap.
2. Place the Rear Grille on the axle.
3. Place the Guard Lock Nut and tighten by turning clock-
wise.
4. Place the Axle Sleeve on the Axle. (
DO NOT USE)
5. Insert the Fan Blade on the Axle
6. Place the Lock Cap and tighten by turning
COUNTER
clock-wise.
7. Install the Front Grille.
•
Align the clip on the top of the front grill and clip it to
the rear grille.
•
Press down firmly at the six points as indicated.
•
Snap close the bottom clip
OPERATING INSTRUCTIONS
To Adjust the height of the stand: Press down on the Height
Lock and adjust height. Release when desired height is
reached.
The base includes a section to store the power cord, when unit
is not in use.
The base, by the control panel, includes a space to store the
remote control.
To place or replace batteries in the remote: remove back cover
of remote by sliding outward. Insert 2 AA batteries as indicated.
Axle
Guard
Lock Nut
Axle
Sleeve
Lock Cap
Axle
Rear Grille
Guard
Lock Nut
Guard
Lock Nut
Fan blade
