SPT SD-2213S Скачать руководство пользователя страница 5

The installation of the pipes 

and electrical equipments 

should be done by professionals.

Warning

Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.

Failure to do so can result in death 
or electrical shock.

Attention:

          

WARNING!

INSTALLATION

Unpacking

Have at least two people to move and install the dishwasher to prevent personal injuries.

Remove all packaging materials: shipping tape, foam pieces, etc. before use. Do not use

sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners. Check and

make sure all parts necessary for installation are included. If parts are missing, please

contact Sunpentown at 1-800-330-0388. The dishwasher must be placed on a level and

flat surface that can support the weight when the dishwasher is fully loaded.

Positioning

This dishwasher is designed for countertop installation.  The dishwasher is equipped

with water supply and drain hoses that can be positioned to the right or the left

to facilitate proper installation. Make sure water supply/faucet connection is within 

reach of the inlet and drain hose assembly (5 ft).

Electrical Requirements

Read all safety precautions listed at the beginning of the manual. Make sure the 

electrical outlet is within reach of the power supply cord (4.5 ft). It is recommended 

to not use receptacles that can be turned on/off by a switch or pull chain.

Refer to the rating label and be sure the voltage and frequency corresponds to the 

power supply.  Use a dedicated circuit that is rated for 10 amps.

The dishwasher is equipped with a power supply cord with a 3-prong grounding plug.

The cord must be plugged into a mating 3-pronged wall receptacle. If a mating wall

receptacle is not available, it is the personal responsibility of the customer to have a

properly grounded, 3-pring wall receptacle installed by a certified electrician.

· DO NOT use an extension cord or an adapter plug with this appliance.
· DO NOT, under any circumstances, cut or remove the ground-prong.
· Improper connection of the connection of the equipment grounding conductor can result in
  electric shock.
· Check with a qualied electrician or service representative if you are in doubt whether
  the appliance is properly grounded.

3

Содержание SD-2213S






















Отзывы: