11
Star ting A Wash Cycle
Once the dishwasher is loaded, follow these instructions to start the wash cycle:
1. Ensure the dishwasher is properly connected to power supply.
2. Ensure the water supply is properly connected and is turned on to full pressure.
4. Add detergent and check Rinse Aid is full.
5. Close the door and press the POWER button to turn on the dishwasher.
6. Rotate the knob to desired program: Heavy -> Normal -> Light (ECO) -> Glass ->
Speed -> Soak.
7. If you wish delay the start time, press the DELAY button to select: 2 hrs -> 4 hrs ->
6 hrs -> 8 hrs.
8. Press the START/PAUSE button to begin the wash cycle.
NOTE: When the START/PAUSE button is pressed during a wash cycle, unit’s operation
is suspended and cycle indicator light will stop blinking. During the pause, the unit will beep
every minute until the START/PAUSE button is pressed again and unit resumes operation.
= Rinse-Aid required
( )
NOTE:
Detergent
pre/main
Cycle Selection
Information
Program
Running
time(min)
Energy
(Kwh)
Water
(l)
Description
of Cycle
Rinse
Aid
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.
For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
A shorter wash for lightly
soiled loads that do not
need drying.
15 g.
85
75
100
45
70
0.361
0.311
0.424
0.233
0.274
12
12
14.5
12
9.7
Pre-wash
Pre-wash
Wash (131°F)
Rinse
Rinse (149°F)
Drying
Pre-wash
Pre-wash
(122°F)
Wash (122°F)
Rinse
Rinse (140°F)
Drying
Pre-wash
Wash(122
°F)
Rinse
Rinse (140
°F)
Drying
/
10
2.5
0.01
Pre-wash
Pre-wash
Pre-wash
(122°F)
Wash (122°F)
Rinse
Rinse(131°F)
Heavy
Pre-wash
Pre-wash(122°F)
Wash (131°F)
Wash (122°F)
Rinse
Rinse (149°F)
Drying
Glass
Speed
15 g.
Light
Soak
18g
18g
18g
Normal
Wach Cycle Table
For lightly soiled loads, such
as glasses, crystal and
fine china.
To rinse dishes that you
plan to wash later.
