3
4) Place to one side.
5) Slide the door downwards and off the top hinge pin.
Lift and remove door, place to side.
6) Remove the two screws from top bracket and transfer
to the other side. You will need to first remove the
plastic caps on the other side.
7) Slide the door back onto the top hinge, be sure the
door is the right way up.
8) Screw the bottom hinge into place on the new side.
9) Place the foot on the other side.
10) Cover the top of door hinge with plastic cover by
gently pushing into position.
11) Check that the door is aligned horizontally and
vertically and that the seals are closed on all sides
before final tightening of the bottom hinge.
12) Adjust the leveling feet as needed.
2.3
Door Space Requirements
The unit's door must be able to open fully as shown.
W
×
D
≥
35.04” x 18.89”
2.4
Leveling the Unit
Adjust the two leveling feet at the front of the unit.
If the unit is not leveled, the door and magnetic seal alignments
will not be covered properly.