background image

LOCK BUTTON 

1.  Press LOCK button to lock in settings.  

 

When locked, display will jump between time left and setting.  

 

No changes can be made (mode, level or time). 

2.  Press LOCK button again to unlock. 

 

SELECTING THE PROPER COOKWARE 

 

 

The base of the cookware must be of a ferrous metal (metal that can 

be magnetized): Cast iron, steel and stainless steel. 

 

Base of cookware should be between 4.5 to 12 inches. 

 

A simple test to check if cookware will be compatible is to take a 

small magnet and place it to the bottom of pan.  If the magnet firmly 

sticks, the cookware is compatible. 

These type of cookware will NOT work with inductions: Glass, copper, 

aluminum, ceramic, cookware with a concaved bottom, bowl-shaped 

cookware or those with a diameter smaller than 4.5 inches. 

 

CARE & MAINTENANCE 

 

 

Unplug unit from power source. 

 

Wipe ceramic plate and exterior surface with a soft damp cloth. If 

excessively dirty, soak cloth in a mild detergent and water mixture. 

 

To remove filter, turn clasp counter-clockwise and pull. Wash filter 

under lukewarm water with mild detergent. Allow to air dry thoroughly 

before replacing.  

 

To replace filter, align in place, press and turn clasp clockwise. 

KEY POINTS 

 

 

If no cookware is placed or sensed on the unit, cooker will 

automatically shut off after 10 seconds. 

 

Cooker will automatically shut-off after 2 hours of inactivity (when not 

set on timer). 

 

Place cooktop on flat surface, but keep a clearance of 4 inches all 

around for proper ventilation. If air inlet or outlet is blocked, the 

internal temperature will rise and cause unit to overheat and shutoff 

during cooking. 

 

Keep away from water source. Never immerse unit in water or clean 

under running water. 

 

Do not place paper or cloth in between the cooktop and cookware. 

 

Due to the magnetic heating of the unit, keep objects that may be 

affected away from unit, such as credit card, watch, radio, etc. 

 

To prevent damage to your cookware, do not heat an empty pan. 

 

Do not place one cooktop on top of another. 

 

Do not place on or near a hot gas or electric burner or in a heated 

oven. If the surrounding temperature is high, unit will shut off. 

 

Do not use cookware consisting of inferior enamel, synthetic material, 

china or aluminum. DO NOT USE PLASTIC WRAP. 

 

Never heat an unopened can on the cooktop as it may explode. 

 

The ceramic plate will retain heat from the cookware; never touch the 

ceramic plate immediately after cookware is removed. Wait a few 

minutes and allow unit to cool. 

 

Plug cooktop in a dedicated 15-amp outlet. Do not share the outlet 

with other appliances. 

 

Do not damage the ceramic plate. Be careful not to drop anything 

onto the ceramic plate. If the plate is broken or cracked, stop using 

immediately. Turn unit off and unplug. 

Содержание Mr. Induction SR-964T







Отзывы: