SPT IM-600US Скачать руководство пользователя

Страница: 14 / 14

Your Guarantee

If this product is found to be faulty as a result of faulty materials or workmanship within
one year from date of purchase, it will be repaired free of charge.

This guarantee is subject to the following terms:

•

Sunpentown must be notified of the fault.

•

Proof of purchase must be presented to Sunpentown’s nominated representative.

•

The warranty will be void if the product if modified, misused or repaired by an unauthorized
person.

•

The warranty after repair will not be extended beyond the original one-year period.

•

All replacement parts will be new or reconditioned.

•

Parts, which are replaced, become the property of Sunpentown.

•

The warranty applies for the use of the product in the USA only.

What is NOT COVERED:

•

Warranty does not include freight charges.

•

Incidental or consequential damage caused by possible defects with this product.

•

Damage to product caused by improper power supply voltage, accident, fire, floods or acts of
nature.

•

Failure of product resulting from unauthorized modifications to the product.

•

Improper installation or failure to perform the necessary maintenance.

This GUARANTEE is in addition to your Statutory Rights

SUNPENTOWN INTERNATIONAL INC.

14625 Clark Ave, City of Industry, CA 91745

Tel: 626-336-2299 · Fax: 626-336-7116

[email protected]

www.sunpentown.com

Содержание IM-600US















Результаты поиска

Содержание IM-600US

Отзывы:

Похожие инструкции для IM-600US

Бренды по названию

Популярные бренды

SPT IM-600US, Инструкция по эксплуатации

Результаты поиска

Содержание IM-600US

Отзывы:

Похожие инструкции для IM-600US

Бренды по названию

Популярные бренды