8
USING YOUR ICE MAKER
OPERATING DETAILS
1. Open the cover, remove the ice basket and pour water into water reservoir. Keep water level
below the level mark.
2. Plug the unit into an applicable power supply outlet.
3. Press POWER button on the control panel to start the ice making cycle.
4. Select desired ice cube size by pressing the SELECT button. If room temperature is below
60°F, select the small ice size to avoid ice sticking together.
5. The ice making cycle take approximately 7 to 13 minutes, depending on the size of the ice
cube selected. (When operating in extremely hot conditions, the time may vary.)
6. When the ice maker is running, check the WATER INDICATOR periodically. If water pump
can’t inject water, the ice maker will stop and the
symbol will be flashing in the LCD
window. If this occurs, press POWER button to stop the unit. Unplug power source and fill
water into the reservoir up to the level mark. Plug in power source and press POWER button
again to start the unit. When the unit is powered off, please allow 3 minutes before turning the
unit back on. This will allow the refrigerant to settle.
7. The ice maker will automatically stop when the ice basket is full. The
symbol will be
displayed in the LCD window.
8. Change water in the reservoir every 24 hours to ensure a reasonable hygiene level. Unplug
and drain water if unit will not be used for a long period of time.
