WARNING! Before assembly, ALWAYS make sure the appliance is turned off
and power is disconnected from the wall socket.
Place the Filter Holder on the motor unit. Align the indentation under the
spout to that on the motor. (With the unit’s control facing you, the spout
should be pointing right)
Place the extractor filter in the middle of the filter holder. Rotate the micro
filter and press firmly into place.
Place the top cover on the filter holder. Position the pulp removal opening in
place with the holder. (The pulp removal opening should face the opposite
side of the spout.)
Lock the top cover in place. Raise the Locking Arms, position the top clip
into indentation on cover and press down firmly. Make sure both locking
arms are clicked securely into place, otherwise the appliance will not work.
Place the juice jug under the spout.
Place the pulp container under the pulp removal opening.
NOTE: The appliance will not operate unless both top cover and the locking
arms are fitted correctly.
ASSEMBLY AND USE
