LOCATION OF PARTS AND CONTROLS
1. Massage Nodes (on back)
2. Main Unit
3. Control Panel
4. Positioning Handles
5. Weighted Arms
6. Power Cord
7. Power Button
8. Mode Button
9. Increase Intensity
10. Decrease Intensity
11. Indicator Lights
USING THE MASSAGER
1. Connect power cord to outlet - Power indicator light will
flash, indicating standby mode.
2. Drape the main unit around your neck with the massage
nodes positioned at center of your back.
3. Press the Power button – Power indicator light will stop
flashing and remain on.
4. Press M (mode) button to begin massage.
5. Press M (mode) button again to select 1 of 3 programs.
6. Press the arrow up button (
▲
) to increase tapping
intensity. When you hear double beeps, you are at the
highest intensity setting.
7. Press the arrow down button (
▼
) to decrease tapping
intensity. When you hear double beeps, you are at the
lowest intensity setting.
8. Use the positioning handles to move the massage nodes
up and down your back.
9. Massager will auto-stop after 8 minutes. You can also
press the Power button to stop massage anytime.
PRODUCT CARE AND MAINTENANCE
Keep massager in a cool and dry place when not in use.
After use, wipe with a soft, damp cloth and non-abrasive
cleaners is excessively dirty.
Never submerge the unit in any liquid.
Keep away from all solvents and harsh detergents.
DO NOT attempt to repair this massager. There are no
user-serviceable parts.
TROUBLESHOOTING
Note: This massager is equipped with a thermal safety shut-
off. Should the massager stop working or fail to power on
after extended use, allow 30 minutes to reset. Massager
will then resume normal function.
