11
2.5 Normal Power on status
Under printer off status, the paper cover closed, then turn on the power switch, the error
indicator and power indicator light two times alternately, the printer enters into the normal
operation.
2.6 Self-test
The self-test will check the condition of printer, if the printer prints out the self-test receipt
correctly, it means the printer works normally, except interface with host. Otherwise it needs
to repair.
The self-test will print out software version, manufacturer name, printer model, interface
type, default parameter of the printer, 96 ANK characters in ASCII, default code
page(language set to English) or Chinese characters stock name(if language set to Chinese),
bar code type.
Self-test method: Keep pressing
【
FEED
】
button, and turn on the power, release the
【
FEED
】
button when buzzer remind power on, then self-test begins automatically at this
moment.
2.7 Hexadecimal Printing
Keep pressing
【
FEED
】
button, turn on the power, when the buzzer beep reminds the
printer powered on, release
【
FEED
】
button, the printer will print below instruction to enter
Hexadecimal Printing mode:
Hexadecimal Dump
To terminate hexadecimal dump,
Press FEED button three times.
Under this mode, all input data will be printed out as HEX data, the printer will feed one
line with single-click of “FEED” button, after 3 times, it will print out “*** Completed
***”,and exit hexadecimal printing mode.
Manufacturer has right to revise this manual without prior statement
