SPRT SP-T5, Руководство пользователя

Страница: 13 / 45

13
printer, so the power charging begins, during the course of
power charging, the charging indicator goes red, and turns to
blue when the charging is over. It takes about 3 hours to
charge the battery. When the charging indicator is purple, it
means battery uninstalled or battery not contacted well. If
powered on the printer by the external power supply and
without the battery, the charging indicator is blue.
Notice: it would better not turn on the printer during the
course of charging power, lest the charging time goes longer.
3.3 Printer Interface Connection
3.3.1 RS-232 Serial Interface
The standard accessories for T5 printer include: DB-9 serial
interface cable (one end is D model standard serial interface
socket, connected to host computer, the other end is PS/2
socket, connected to printer).
When connect the serial interface, if it works normally, then
the printer stops to received data from Bluetooth, or IrDA
interface.
The specification of serial interface of T5 as below:
Data Transfer: Serial
Synchro Mode: asynchronous
Handshaking: Hardware RST/CTS or Xon/Xoff optional
Signal Level: RS-232
Baud Rate:1200, 2400, 4800, 9600, 19200, 38400,
57600
，
115200bps optional