SPRT SP-RMDIIID, Руководство пользователя

Страница: 36 / 61

34
Hexadecimal: 1B 40
Explanation:
This command is to initialize the following contents of the printer:
·Clear the data in the print buffer;
·Restore the default;
·Delete user-defined characters.
4.2.7 Data Control Commands
CR Carriage Return
Format: ASCII: CR
Decimal: 13
Hexadecimal: 0D
Explanation:
When the “CR” command is sent to printer, all data in the print buffer will be printed out and
paper will be fed one line.
NUL NUL
Format: ASCII: NUL
Decimal: 0
Hexadecimal: 00
Explanation:
NUL command is used as the final code in some commands such as ESC B, ESC D, ESC%
and ECS ’, to denote these commands are over. NUL command is ignored when used alone.
4.2.8 Chinese Character Print Commands
The command to print Chinese character is FS standard command. All Level I&II Chinese
characters and graphics, etc in 16dots&24dots Chinese character library are according to
Chinese National Standard GB2312-80. For 24dots, there are only graphics, symbols, etc I
A1 and A9 zone are 24dots. Each Chinese character has two bytes. Big5 characters with
16dots are in Traditional Chinese characters library.
The following is the detailed of Chinese Character Print Commands:
FS & Select Chinese Print Mode
Format: ASCII: FS &
Decimal: 28 38
Hexadecimal: 1C 26