SPRT SP-RMD8D, Руководство пользователя

Страница: 24 / 51

21
ESC 6 Choose Characters Set 1
Format: ASCII
：
ESC 6
Decimal
：
27 54
Hexadecimal:
：
1B 36
Explanation
：
After inputting this command, all the characters will be printed out according
to the Characters Set 1 in ANK.
ESC 7 Choose Characters Set 2
Format
：
ASCII
：
ESC 7
Decimal
：
27 55
Hexadecimal
：
1B 37
Explanation
：
After inputting this command, all the characters will be printed out according
to the Characters Set2 in ANK.
4.2.4 User-defined Character Setting Commands
ESC
＆
User Define Character
Format
：
ASCII
：
ESC
＆
m n1 n2……n6
Decimal
：
27 38 m n1 n2……n6
Hexadecimal
：
1B 26 m n1 n2……n6
Explanation
：
This command permits user to define one character. Parameter m is character
code the user defines, m=32
～
255; parameter n1, n2……n6 is structure code to define this
character. The character dots should be 6x8, which means 6column and 8dots each column.
There is one character byte in each column and the MSB is on the tope as below picture,
User-defined character is saved in RAM and will be lost after power off. If several ESC &
commands use the same m value, only the last one is valid. At most 32 characters can be
defined by users. Ref: ESC% and ESC: commands.