7
Method of printing self-test: Press
【
FEED
】
button and turn on the power, then the red
indicator light will flicker at 1 time/s. Release the button within 3 times of flicker,
self-test begins automatically.
2.6 Hexadecimal Dump
Press
【
FEED
】
button and turn on the power, the red indicator light will flicker at 1
time/s, after 3 times then release the button, the red light will go on flickering 3 times,
then the printer will print out 3 lines message as bellow:
Hexadecimal Dump
To terminate hexadecimal dump,
Press FEED button three times.
Under this mode, all the input content will be printed out as Hexadecimal data. Press
the
【
FEED
】
button to feed one line each time. Press 3 times, *** Completed ***will
be printed out.
The Hexadecimal Dump print mode will be exit.
2.7 Upgrade Mode
Press
【
FEED
】
button and turn on the power, the red indicator light will flicker at 1
time per second, after flickering 3 times then release the button. At this moment, the
printer enters into Mode Option Status. Then press
【
FEED
】
button 5 times
continuously and the press time interval must be within 3s. The indicator will flicker at
1s on and 1s off status.That means the printer has entered into Upgrade Mode
successfully.
Chapter 3 Printing Driver Installation
Printing driver for SP-POS5810 can be downloaded from our official website
(www.sprt-printer.com). The detailed path: Home page--
Service-Download-Driver-Windows driver receipt printer series. After downloading,
the driver name is SP-DRV2148. During the driver installation, choose printer model
as “58 thermal series”. For more operation details, pls refer to the manual.
