7
tone, loose the
【
POWER
】
button. The LCD shows “Loading...”, then
the printer enters into the working mode. The LCD shows printer
parameter.
3.2.2 Switch Off
Under status of switch on, the printer will send out the prompt tone of
‘one high one low ’ after pressed the
【
POWER
】
button, the LCD turns
off, then loosen the
【
POWER
】
button, the printer is off.
3.2.3 Self-Test
After receiving the printer, user can check its current setting and
status at anytime.
Self-test method is as below: Power off, then hold down the
【
FEED
】
button and press the power button at the same time. Then loosen the
【
FEED
】
button and Power button when you hear ‘one low one
high ’prompt tone, the current setting and status will be printed out.
3.2.4 Paper Feeding (Manual Feeding)
Under the normal work status and using the thermal receipt paper,
press
【
FEED
】
button, the paper feeding begins, and stop when
loosen
【
FEED
】
button. When the printer uses black mark paper
and label paper, press
【
FEED
】
button, the printer begins to feed
paper and stops over the position of black mark or label spacing. If
the paper is not the black mark or label paper, the printer stops
automatically after feeds paper for 26cm. And also alarm the error if
under label paper mode.
3.2.5 Hexadecimal Printing
The function of hexadecimal printing is to print the information
received from host machine by hexadecimal numbers and
corresponding characters. It will be convenient to debug application.
Into hexadecimal printing: Power off, hold down the
【
MODE
】
button
and press the power button at the same time. Then loosen the power
button and press the
【
FEED
】
button when you hear ‘one low one
high’ prompt tone of power on. After that you may loosen the
