6
printing paper face when you install the new paper roll. (Pic.2)
3. Pull out a part of paper and put them in the middle of the paper out orifice.
(The end of paper is beyond the tear cutter.)
4. Shut down paper case cover and cut off the redundant paper
5. Use the Optional Paper Holder (80mm/58mm/44mm), put paper roll with
different width into the holder accordingly. (Pic. 3)
6. Repeat Steps 3~4.
（
Pic.1
）
（
Pic.2
）
（
Pic.3
）
3.1.3 Others
Open and close the door instruction: When closing the door, insure to close
right and left side at the same time.
Abnormal operation instructions: Paper blocking is not allowed at the outlet.
Placement direction: Hand-held flat printing when printing, to ensure the
stability of the paper roll as far as possible.
3.2 Basic function usage
Printing Mode: Standard Mode and Logistics Mode.
Paper Type: Thermal paper, Black mark paper and Label paper.
Logistics Mode: Way Bill online mode, Receipt online mode, Invoice online
mode. Label paper ( 79.5mm width ) as default under Way bill mode. Receipt
