10
Diameter
16 mm
5/8‘‘
19 mm
3/4‘‘
22 mm
7/8‘‘
25.4 mm
1‘‘
32 mm
1 1/4‘‘
Sheets 70 - 80 g
130
150
190
210
280
Binding
1. To bind the documents correctly, be sure to choose the correct size wire, please check
the below chart to do so:
2.
Press and open the wire grip board, locate the selected wire into the grip slot horizontally,
then release the wire grip board to press the wire with the opening mouth on top properly
(see chart 4 and 5).
3.
Insert the punched front covers, documents, back covers into the wire mouth carefully
(see chart 6).
4.
Place the wire with documents into the grip slot horizontally (under the wire grip board),
make
sure the mouth of the wire stick to the magnetic wall (see chart 7).
5.
Adjust the wire-close control knob to the right position as per the range of the wire size, note
that the diameter will be larger if the knob closer to the
lef
t within the range (see chart 8).
6.
Pull down the press wire handle and close the wire ring properly, such action can be repeated
two or three times to bind out the perfect document.
7.
Remove the bound documents from the grip slot and fi nish the binding.
Chart 7
Chart 4
Chart 5
Chart 6
Chart 8
