Sprint AIRAVE 2.5+, Руководство по устранению неисправностей

Страница: 12 / 20

12 AIRAVE Technical Support 866-556-7310
Use the external GPS antenna cable if your AIRAVE’s internal antenna is not receiving a sufficient signal
(indicated by a blinking red GPS LED). Connect the external GPS antenna cable to your AIRAVE’s GPS
connection port.
1. Remove the GPS antenna
module from the back of the
AIRAVE. Connect the external
GPS antenna cable to the
antenna module and the
AIRAVE.
2. Place the external GPS
antenna (tape-side down)
horizontally on a flat surface as
close to a window as possible.
The antenna works best in an
open area where it can easily
pick up signals.
Note: If the provided external GPS
cable is not long enough to reach a
window, there are options to purchase a longer GPS cable through vendors. Contact AIRAVE Technical Support for
more information.
Why does the AIRAVE™ need a GPS antenna?
The AIRAVE has a GPS antenna so that it can:
•
Synchronize properly with the rest of Sprint’s network.
• Determine and select the correct radio frequencies available in your area so that the AIRAVE uses the
correct ones.
Why does the AIRAVE™ need an external GPS antenna cable?
Your device needs the external antenna only when the internal GPS antenna cannot lock on to sufficient
satellite signals. The external antenna lets the AIRAVE lock on to the greatest number of satellites.
External GPS Antenna Setup
LAN 2
Reset
LAN 1
WAN
12VDC
GPS
Mobile
Network
GPS
Broadband
Place on Window Sill
AIRAVE
GPS Antenna Module