16
Springfree™ Trampoline Model SF90E Trampoline and Enclosure Assembly, Installation, Care, Maintenance and Use Instructions Version 6.4
Step 18: Inserting the irst
enclosure rod
Insert the ball end of the rod up through the
loop and into a pocket in the top edge of
the net.
Ensure the rod is pushed right to the end
of the pocket. Unless you do this, the internal
catch cannot prevent the rod from coming out
during use. Next, hoist the net up.
Figure 18: Inserting an enclosure rod into a pocket
rod ball-end through loop, into pocket
WARNING: Never attempt to remove
an enclosure rod from its socket or
disengage (unlock) the joiner while
the enclosure rod is under tension.
Step 17: Assembling the enclosure
rods
Straighten the enclosure rods and slide the
white joiner down to lock the two rods together
(Figures 17-A, B and C).
Figure 17-B: Aligning rod parts at the joint
Figure 17-C: Locking the joint
align
lock
Figure 17-A: Straightening an enclosure rod
unfold
WARNING: Treat any loaded rod
with caution until you are sure it is
properly installed or uninstalled.
Keep your face well away from any
loaded rod.
