PMU84QP-AB
2 / 2
PROXRUNNER - Quick Start Guide
Copyright © PRO ACTIVE SAS 2009, all rights reserved.
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or
trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
Bluetooth Connection LED colour :
The LED colour is
Green
The reader is set in Real
Time mode
The LED colour is
Orange
The reader is set in Batch
mode
The LED colour is
blinking Orange/Green
The reader is set in Batch
mode, but no data is stored
in the memory
Reading Status LED :
One Single long Blink
(Green colour)
The reader has just read
and decoded a Tag
One Single long Blink
(Red colour)
The reader hasn ’t read and
decoded a Tag
One Single long Blink
(Orange colour)
You pressed the Trigger
button, and the reader is
trying to read a Tag
Double fast Blinks Red Battery level is low, please
recharge the battery
immediately
One Single long Blink
Red + Green (solid)
The reader is charging
Green (solid)
The reader is fully charged
Special cases :
Both LED blinks
Orange
The reader is set in the “Real Time
with No Data Loss mode” but with
no bufferisation (buffer configured
to 0) and is not connected. In this
particular
situation
the
RFID
antenna is disabled: impossible to
read Tags in this mode.
Both LED are
Orange (solid)
The reader is set in the “Batch
mode” and its memory is full:
impossible to read another Tag in
this mode.
C
ONFIGURING
B
ARACODA
M
ANAGER
Turn on the device
Launch BaracodaManager
Search all devices
Select
the
device
corresponding
to
your
ProxRunner and add it
Choose the KEmul plugin
Hide BaracodaManager
With ProxRunner, only the Trigger
scan mode is possible.
C
ONFIGURING
KE
MUL
Turn on the device
Connect the device to the terminal using the
Bluetooth software
Activate the COM Port Service (note the port
number)
Launch KEmul
In COM port settings, put the port number
U
SING THE
P
ROX
R
UNNER
The ProxRunner together with the Baracoda Manager
or the KEmul emulates a keyboard.
Put your cursor where you want the data to be
entered, then
hold
the ProxRunner button and put a
card in front of the antenna.
You may depress the button when hearing the tone.
C
ONFIGURING THE
P
ROX
R
UNNER
C
REATE THE
M
ASTER
C
ARD
For more information, please read the “Configuring
the RFID Scanners” part of RFID Scanners Solution at
:
www.springcard.com/solutions/rfidscanner.html
U
PDATE THE
C
ONFIGURATION
Put the Master card in front of the antenna
Press the ProxRunner button
until the reader
reboots
(both LED blinks Green and the reader
emits a long sound)
F
IRMWARE
U
PDATE
Use Baracoda Manager to update the
reader.
Launch BaracodaManager
Search all devices
Select
the
device
corresponding
to
your
ProxRunner and add it
Click “Settings”
Click “Upgrade”
Choose the “Files of type” : “Baracoda CPU
upgrade file” or “RFID card upgrade file”
Choose the upgrade file and click “Open”
Wait that the upgrade is completed
