Matrix 908 Field Computer
17
98-01578-EN R0
NO.5 SET UP THE GNSS
NOTE: These settings are required for rate control,
assisted/auto steering, and tilt sensor
operation, as well as proper implement
operation.
1. On the Main Menu
, on the Settings Menu
,
select
GNSS Receiver
.
2. Under
General Settings
, make adjustments to
settings as needed.
3. When available, under
Advanced Settings
, make
adjustments to settings as needed.
4. Exit this screen to begin initializing the GNSS
receiver. A pop-up message will appear during the
initialization. This takes about a minute.
For more details on GNSS Receiver options, see
"Appendix A – GNSS Receiver Details" on page 34.
Содержание TeeJet Matrix 908
Страница 1: ...98 01578 R0 U S E R G U I D E...