3
spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
READ AND FOLLOW INSTRUCTIONS:
WARNING: All safety related and operating instructions should
be read before the nozzle is operated. Follow all operating
instructions. Failure to do so could result in serious injury.
• WARNING:
It is important to recognize proper safety
precautions when using a pressurized spray system. Fluids
under pressure can penetrate skin and cause severe injury.
• WARNING:
When dealing with pressure applications, the
system pressure should never exceed the lowest rated
component. Always know your system and all component
capabilities, maximum pressures and flow rates.
• WARNING:
Before performing any maintenance, make sure
all liquid supply lines to the machine are shut off and/or
disconnected and chemical/fluid are drained.
• WARNING:
The use of any chemicals requires careful control
of all worker hygiene.
• WARNING:
Spraying Systems Co. does not manufacture or
supply any of the chemical components used in this equipment
and is not responsible for their effects. Because of the large
number of chemicals that could be used and their different
chemical reactions, the buyer and user of this equipment
should determine compatibility of the materials used and any
of the potential hazards involved.
• WARNING:
Before use, be sure appropriate connections are
secure and made to withstand weight and reaction forces of
the operating unit.
• WARNING:
Spraying Systems Co. strongly recommends
the use of appropriate safety equipment when working with
potentially hazardous chemicals.
This equipment includes but is not limited to:
Protective hat
Safety glasses or face shield
Chemical-resistant gloves and apron
Long sleeve shirt and long pants
NOTE: Always remember to carefully read the chemical
manufacturer’s label and follow all directions .
WARNING: DO NOT USE TO SPRAY FLAMMABLE LIQUIDS —
SUCH USE COULD RESULT IN FIRE OR EXPLOSION CAUSING
BODILY INJURY OR DEATH .
• WARNING:
Never operate tank cleaning equipment in the
open due to the potential of bodily injury.
• WARNING:
It is important to operate equipment within
the temperature range of all components. Also ensure that
appropriate time lapses or proper safety equipment is used
when handling components after they’re exposed to high
temperatures.
• WARNING:
Remove equipment from the tank before attempting
any repairs.
• WARNING:
Proper hoisting procedures should be used when
installing and removing all equipment.
• WARNING:
If walking on top of a tank is deemed safe and is
necessary, use proper safety precautions to protect individuals
as well as the equipment.
• WARNING:
Do not put any part of your body in the tank during
operation of the tank cleaner. This is NOT a safe procedure for
verification of operation.
• WARNING:
To ensure the safety of the equipment as well
the individuals using them, only use Spraying Systems Co.
components.
• WARNING:
When packaging and transporting, use structurally
sound boxes or crates that can handle the weight of the
equipment.
• WARNING:
Tank cleaners should be flushed out with clean
water before they’re stored or shipped to minimize health
hazards or cross contamination.
• WARNING:
Do not use any equipment outside the intended
purposes of the product. Misuse can result in personal injury
or product damage.
The container being cleaned should be sealed as best as
possible while the TankJet 75 models are running their cycle. The
combination of temperature, cleaning solution, spray impact and
the potential toxic materials being cleaned can cause a hazard to
anyone in the path of the spray.
GENERAL SAFETY INSTRUCTIONS
