MATRIX
®
430VF
GUID
ANCE
JOB D
AT
A
CONFIGUR
ATION
CONSOLE
1
98-05351-EN R1
INTR
ODUC
TION
CHAPTER 1 – INTRODUCTION
SYSTEM COMPONENTS
Matrix 430VF Console
The console is designed to provide years of service under typical agricultural operating conditions. A tight fitting enclosure, combined
with rubber covers for all connectors means that typical dusty environments will not cause operational problems. While occasional
splashing of water will not damage the unit, the console is not designed for direct exposure to rain. Take care not to operate the console
in wet conditions.
GNSS Antenna connection
Power connection
Integrated RAM Mount
(assembly required)
Power button
USB Port
with rubber cover
Standard RAM Bracket
(assembly required)
Bright Touch Screen
System Components
C12v at 15/30
Connect GND to 31
Power Cable
45-05867
DC:xx/xx
Console, Matrix 430VF
CG430VF-GLO
Kit, RAM Mount
w/ Suction Cup
Power Cable
45-05645
DC:xx/xx
Connect to
+12v Only
POWER CABLE
45-05775
DC: XXXX
CAUTION CONN. TO
+12V ONLY
RXA-30 Antenna
Power Cables
Power/Sense/Speed Cables
Direct to Battery 45-05775
Lighter Adapter 45-05645
US 45-05970
EU 45-05969
COBO Adapter 45-05867
Status On/Off
SENSE
+12v
GPS Speed
POWER IN
Power/Sense/
Speed
45-05970 xx/xx
Power/Sense/
Speed
45-05969 xx/xx
POWER IN
Work On-Off
GPS Speed
The console needs to be cycled off and back on when changing or attaching equipment to the Matrix 430 system.
Recommended Antenna Installation
The GNSS antenna should be mounted as far forward as possible on top of the cab on a metal surface of at least 4”/10 cm square.
