3
GENERAL SAFETY INSTRUCTIONS
READ AND FOLLOWING INSTRUCTIONS:
WARNING:
All safety related and operating instructions
should be read before the nozzle is operated . Follow all
operating instructions . Failure to do so could result in
serious injury .
• WARNING:
It is important to recognize proper safety
precautions when using a pressurized spray system .
Fluids under pressure can penetrate skin and cause
severe injury .
• WARNING:
When dealing with pressure applications,
the system pressure should never exceed the lowest
rated component . Always know your system and all
component capabilities, maximum pressures and flow
rates .
• WARNING:
Before performing any maintenance,
make sure all liquid supply lines to the machine are
shut off and /or disconnected and chemical/fluid are
drained .
• WARNING:
The use of any chemicals requires careful
control of all worker hygiene .
• WARNING:
Spraying Systems Co . does not manufacture
or supply any of the chemical components used in
this equipment and is not responsible for their effects.
Because of the large number of chemicals that could
be used and their different chemical reactions, the
buyer and user of this equipment should determine
compatibility of the materials used and any of the
potential hazards involved .
• WARNING:
Spraying Systems Co . strongly
recommends the use of appropriate safety equipment
when working with potentially hazardous chemicals .
• WARNING:
Before use be sure appropriate
connections are secure and made to withstand weight
and reaction forces of the operating unit .
This equipment includes but is not limited to:
• Protective hat
• Safety glasses or face shield
• Chemical-resistant gloves and apron
• Long sleeve shirt and long pants
NOTE: Always remember to carefully read the chemical
manufacturer’s label and follow all directions.
• WARNING: DO NOT USE TO SPRAY FLAMMABLE
LIQUIDS--SUCH USE COULD RESULT IN FIRE OR
EXPLOSION CAUSING BODILY INJURY OR DEATH.
• WARNING:
It is important to operate equipment
within the temperature range of all components . Also
insure that appropriate time lapses or proper safety
equipment is used when handling components after
they’re exposed to high temperatures .
• WARNING:
Never operate tank cleaning equipment in
the open due to the potential of bodily injury .
• WARNING:
Removed equipment from the tank before
attempting any repairs .
• WARNING:
If walking on top of a tank is deemed safe
and is necessary, use proper safety precautions to
protect individuals as well as the equipment .
• WARNING:
Do not put any part of your body in the
tank during operation of the tank cleaner . This is NOT
a safe procedure for verification of operation.
• WARNING:
Proper hoisting procedures should be
used when installing and removing all equipment .
• WARNING:
To insure the safety of the equipment
as well the individuals using them, only use Spraying
Systems Co . components .
• WARNING:
When packaging and transporting use
structurally sound boxes or crates that can handle the
weight of the equipment .
• WARNING:
Tank cleaners should be flushed out
with clean water before they’re stored or shipped to
minimize health hazards or cross contamination .
• WARNING:
Do not use any equipment outside the
intended purposes of the product . Misuse can result in
personal injury or product damage .
The container being cleaned should be sealed as best as
possible while the TankJet 65 models is running its cycle .
The combination of temperature, cleaning solution, spray
impact and the potential toxic materials being cleaned can
cause a hazard to anyone in the path of the spray .
