Spraying Systems Co GunJet 80, Руководство пользователя, Страница: 2 / 12

2
CONTENTS
CONTENTS ............................................................................................................ 2
WARNINGS & PRECAUTIONS ............................................................................... 2
INTRODUCTION .................................................................................................... 2
INSTALLATION ...................................................................................................... 5
MAINTENANCE ..................................................................................................... 6
DATA SHEET ......................................................................................................... 9
PARTS LIST .......................................................................................................... 10
INTRODUCTION
NOTE:
The 80W features the continuous "weep" feature. Except for the Valve
Stem and Seat Plug, the #80 and #80W GunJets® are identical and require the
same installation and operating procedures.
WARNINGS & PRECAUTIONS
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USING SPRAY GUN
GENERAL WARNING FOR HIGH PRESSURE SPRAY GUNS: THIS IS A HIGH
PRESSURE DEVICE WHICH SHOULD ONLY BE USED IN A PROPERLY
ENGINEERED SYSTEM. THIS SPRAY GUN SHOULD BE OPERATED ONLY BY
TRAINED OPERATORS AND KEPT OUT OF REACH OF CHILDREN. PLEASE READ
THE FOLLOWING INSTRUCTION SHEETS BEFORE ATTEMPTING TO OPERATE
THE #80 HIGH PRESSURE GUNJET SPRAY GUNS. IF THE OPERATING PRESSURE
IS BETWEEN 100 PSIG (0.69 MPA) AND 3200 PSIG (22.06 MPA), THEN AN
EXTENSION OR WAND SHOULD BE USED THAT SEPARATES THE DISCHARGE
NOZZLE A MINIMUM OF 29.5 INCHES (750 MM) FROM THE TRIGGER
MECHANISM. DO NOT ASSEMBLE DISCHARGE NOZZLE DIRECTLY INTO THE
SPRAY GUN.
IF THE OPERATING PRESSURE IS BETWEEN 3200 PSIG (22.06 MPA) AND 5000
PSIG (34.48 MPA), THEN AN EXTENSION OR WAND SHOULD BE USED THAT
SEPARATES THE DISCHARGE NOZZLE A MINIMUM OF 4.0 FEET (1.22 M) FROM