background image

3

 

SECTION 1

 

PREFACE 

 

1.1 Important

 

The AccuCoat

®

 HD15 In

-

Line Heater and all components are produced, tested and checked at the factory. The sys-

tem can be dangerous if used incorrectly. Read this manual carefully and read any safety instructions. 

 

Operators must always follow the general safety instructions in the working area and aim to prevent accidents.

 

The manufacturer reserves the right to make changes in standard construction without prior notification. 

 

Images and diagrams in this manual may not be exact representations of your system configuration.

 

1.2 HOW TO USE THIS MANUAL

 

This manual is intended to be a source of information for the operators and technicians who may be installing, inter-
acting with, or servicing/maintaining Spraying Systems Co.

®

 systems and components. 

 

This manual contains important safety warnings, installation instructions, operating instructions, troubleshooting, 
and maintenance information.

 

ICONS

 

WARNING: The user can be seriously injured, damage their health, and/or damage the system.

 

CAUTION: Product, process, or environment can be damaged or be in danger if the instructions 
are not followed correctly. 

 

ATTENTION: Supplementary information for the user draws attention to possible problems.

 

Содержание AutoJet AccuCoat HD15



















Отзывы: