Spracht®
4
Alternating Between Deskphone and Computer
When you connect the base to the power adapter, Zūm
Maestro Combo USB/DECT™ will be in default mode, which
is Deskphone. The LED in the front of the base will indicate
Deskphone mode.
To switch to Softphone mode with your computer, connect
the USB cable to the base and your computer. Press the
PAGE button on the back of the base. The LED on the front
of the base should indicate Computer mode.
Your computer should automatically recognize your
headset and install whatever drivers might be needed.
To switch back to Deskphone mode, press the PAGE button
on the back of the base again; the LED on the front of the
base should indicate Deskphone.
Configuring the Deskphone Audio
Due to the large variety of Deskphone brands/models,
you will need to set a clear dial tone before using ZūM
Maestro Combo USB/DECT™ for the first time. Setting a
clear dial tone will enable the device to function correctly
with your specific Deskphone. It is also important to
customize the microphone and receiver volume for your
optimal sound quality.
Adjust for clear dial tone
1. Put the Headset on.
2. Get a dial tone by pressing the headset button on the
Deskphone, or by lifting the Deskphone’s handset.
3. Using the Dial Tone switches at the back of the Base,
compare the dial tones after rotating the switch from A
through to G.
4. Choose the best switch position. Choose the position
with loud, clear and undistorted dial tone.
5. When you have set the best tone, press the headset
button on your Deskphone or replace the phone’s
handset.
