ZuM eco-Set™
8
3.5 Adjusting Headset Receive Volume
Use the volume control buttons on the headset to adjust the receive volume on your
headset. You will hear a beep sound for each volume step Up or Down.
3.6 Out of range and reconnection
You will hear a warning tone in the headset when you walk out of range of the base. The
headset will be disconnected from the base and the call will be automatically placed on
hold. If you move back inside the range of the base the headset will automatically
reconnect and the call will be active again. NOTE: If you do not move back inside the base
range within 5 minutes the call will be disconnected.
3.7 Battery Level Indication
The four LED's (8) on the top of the headset base indicate the battery level of your headset.
3.8 Making A Conference Call
Your
ZuM eco-Set™
headset allows for a second headset to be temporarily connected to
the base so that you can have a three way conference call.
• Setup the call using the primary headset unit.
• Once on the call, place the second DECT headset unit on the base charger.
• After one second, the "Online Indicator" LED of the new headset will turn on and the
base "Online indicator" LED will flash to indicate the headset is registering with base unit.
• Once the registering has completed, the base "Online Indicator" LED will stop flashing
and the additional headset LED will flash.
• Once the registration has completed, a confirmation sound will be heard on the
primary headset.
• Lift the additional headset from the base and it will enter talk mode.
< 20%
20%-40%
40%-60%
60%-80%
80%-100%
