Conference Phone Operation with Digital Phone System
Answering a call
1. When the phone rings, pick up the digital telephone handset to accept the call.
2. Press the ON/OFF key to take the call on the Conference Phone. The green LED illuminates to indi-
cate the Conference Phone is on; the microphone in the digital telephone handset is disabled while
the Conference Phone is on.
Note:
the digital telephone handset must remain off-hook for the duration of the call.
Adjusting the speaker volume
While a call is in progress use the
▼
(decrease volume) and
▲
(increase volume) keys to adjust the
speaker volume. The speaker volume setting is saved until adjusted again.
Note:
When a call is
not
in progress, pressing the volume keys adjusts the
ringer
volume. The ringer
volume setting is saved until adjusted again.
Placing a call
1. Pick up the digital telephone handset and dial the call.
2. Press the ON/OFF key to take the call on the Conference Phone.
Note:
with a digital telephone system, you must use the digital telephone to dial all calls. You cannot
use the Conference Phone keypad to dial or redial calls with a digital telephone system.
Note:
the digital telephone handset must remain off-hook for the duration of the call.
Muting a conversation
To turn off all microphones during a conversation, press the MUTE key. The red LEDs illuminate to indi-
cate the participants cannot be heard at the other end of the line. Press the MUTE key again to turn on
the microphones.
Ending a call
Hang up the digital telephone handset.
Press the ON/OFF key. The green LED will extinguish.
11
Digital Systems
Содержание Voice Center cp-2010
Страница 1: ...Voice Center Conference Phone CP 2010 model series User s Manual...
Страница 2: ......
Страница 19: ......
