SpotOn Virtual Fence, Руководство пользователя, Страница: 8 / 15

12 13
On the Collar:
Use the right button to "Select Map."
Toggle to the fence of your choice, and
use the center button to select your fence.
Through the App:
If cell service is activated, select "Manage
My Maps," select your fence and hit
"Activate".
To test your fence, hold the collar and walk towards
the flags. (If you are using static correction, hold the
contact point tester against the static contact points as
pictured below.) About ten feet away from the flags,
you should hear the alert tone, and at five feet you
should hear the warning tone. When you reach the
boundary line, if using static correction, the contact
point tester should glow orange. This means the static
correction is working!
HELPFUL HINTS:
1. The tones are set for dogs
to hear but may not be
audible to you while your
pup is wearing the collar —
especially if your pup is
long-haired or particularly
fluffy!
HELPFUL HINTS:
1. Testing your fence each
time you begin training
your pup guarantees you’ll
know where the tones are
sounding in relation to the
flags.
11. Test Your Fence
Testing your fence is important—especially when
training your dog. Since GPS has a natural shift of
three to ten feet, before training you’ll want to make
sure you know where your dog will be hearing the
tones and receiving the (optional) static correction.
Like we mentioned before, the flags are more of a
visual guide for you than your pup. Training your pup
to the tones means any GPS shift will go practically
unnoticed by your dog, which also makes traveling
with SpotOn a breeze!
10. Activate Your Fence
Select Map
Select Map