
INSTRUCTIONS IN ENGLISH
|
SOIL MOISTURE METER
3
USE OF PRODUCT:
Turn on the meter by pressing POWER button (4) of Fig. 1. The display will first show the Rod
Length (2.4”Rods), which are pre-installed in the unit. See
Changing Rods
if using 1.5” Rods. Next
the display will show the battery life in %. Lastly, the display will show VWC or VWC + EC + Temp
and is ready to take measurements.
Note: To switch the display between VWC only and VWC + EC + Temp (°F or °C), press the POWER
and AVG buttons simultaneously. The meter will then continuously take new sensor readings and
display updated values every second until turned off.
As pictured above: With the meter facing you, install the handle with Cap for Battery
Compartment (1) of Fig. 1 by handle turning clockwise until as tight as possible by hand. Do the
same for the handle with Cap for In-Handle Rod Storage (2) of Fig. 1. Once both handles are
attached, use a Hex Key Wrench (included) to tighten the locking screws. Store extra rods in
LEFT handle. Install (3) AA/LR6 Alkaline Batteries (included) in RIGHT handle.
SpotOn® Soil Moisture Meter Item #39240
METER ASSEMBLY: