
INSTRUCTIONS IN ENGLISH
|
QUANTUM PAR LIGHT METER
4
1
METER COMPONENTS:
Sensor Cap
Light Sensor
LCD Display
POWER Button
SCAN Button
Battery Compartment
Universal Mounting Bracket
1
2
3
4
5
6
7
2
3
4
5
6
7
Fig. 5
USE OF PRODUCT:
Instantaneous PAR Light Readings
Scanning Area for Average PAR Light
Remove the sensor cap and press the POWER button to turn
on the meter. Wait 3 seconds while the DLI value is displayed.
The meter then measures and displays instantaneous PAR
light readings about once per second. The meter’s software
automatically stabilizes readings from 50 or 60 Hz light sources.
The display automatically turns off after 5 minutes if no buttons
are pressed. You can also turn it off by pressing the POWER
button.
While the meter is displaying Instantaneous readings press
and hold the SCAN button, then move the light meter steadily
and fluidly under the area for which you desire an average light
reading. Scanning can be done for up to 35 seconds. The LCD
will flash “SCAN” while the button is held, once released, the
meter will display the average light reading from the duration of
the scan. This average reading will be displayed for 4 seconds
before the meter returns to instantaneous readings. Note: the
SCAN function can be used to hold or freeze readings on the
display (for 4 seconds) when taking measurements in a location
where it is not possible to view the display.
SpotOn® Quantum PAR Light Meter Item #35650
YOUTUBE.COM
SEARCH:
SpotOn Quantum PAR Light Meter
DEMO VIDEO:
Содержание 35650
Страница 35: ...33 ...