Spotel™ By Nicherons Canada
One Chunnel GSM VoIP Gateway
7
2.3 LED Indicators
The following table defines the status of the LEDS located on the top case and on the
RJ-45 connectors.
LED
DESCRIPTION
RUN
1. When the is booting
，
this LED will flash
100ms ON and 100ms OFF.
2. When the is login your softswitch, this
LED will flash 1s ON and 1s OFF.
GSM
When the ’s GSM login the ISP’s system,
this LED will flash 1s ON and 1s OFF.
2.4 SMS Commands
supported commands come from SMS.
FUNCTION
SMS CONTENT
REMARK
Obtain LAN Port Info
INFO
Not distinguish majuscule and lowercase
Reset device
RESET
Password
Not distinguish majuscule and lowercase
Reboot device
REBOOT
Password
Not distinguish majuscule and lowercase
Note
：
In command
Reset
and
Reboot
, the Password is the device’s admin password.
The command keywords can use majuscule and lowercase, but the password must
distinguish majuscule or lowercase.
3 Configuration Guide
To configure the Gateway, you must login to its Web server via the LAN or PC port.
The LAN port is factory preset to obtain an IP from the local DHCP host and the PC port is
set to the fixed IP 192.168.8.1.
If a local DHCP host is available, the LAN will obtain an IP address automatically. To listen
to the IP address assigned, just dial a call via the Gateway’s SIM card phone number.
When the call is connected, you will hear a dial tone. Just dial “*01#” for English voice
prompt on the LAN IP and “*00#” for Chinese voice prompt on the LAN IP. The LAN IP
Address can also be obtained by sending a SMS message to the GSM phone number.
The will then reply with a SMS message containing the LAN IP address.
If you want obtained LAN port IP by sending a SMS message, please send”
INFO
“or”
