Spot-on NovaGear NG-54, Инструкция по эксплуатации

Страница: 16 / 20

16
WASTE DISPOSAL
& RECYCLING
SERVICING
Do not dispose of this product
in household waste!
Please recycle this product
responsibly in accordance with
local and national law.
For information on servicing
and repairs please contact
Spot-on on 1300 658 338 or
visit www.spoton.com.au.
NOTE: Nova Gear will not be
responsible for any damage or
injuries caused by repair of the
reciprocating saw by an unauthorised
person or by mishandling of the
reciprocating saw.
MAINTENANCE
› When not in use, the reciprocating
saw should be stored in a dry, frost free
location, out of reach of children.
› Keep ventilation slots of the
reciprocating saw clean at all times and
prevent any foreign matter from entering.
› If the housing of the reciprocating saw
requires cleaning, do not use solvents
but a moist soft cloth only.
› Blow out the ventilation slots with
compressed air periodically.
› Periodically clean dust and debris from
the blade clamp with dry compressed air.
› If the collar resists twisting, twist the
collar back and forth to shake debris
loose.
› Periodically lubricate the blade clamp
with a dry lubricant such as graphite. METAL CUTTING
Metals such as pipe, steel rods, sheet
steel, aluminum, brass and copper can
be cut with your reciprocating saw.
› To cut thin sheet material, “sandwich”
the material between hardboard or
plywood and clamp the layers to limit
vibration and material tearing.
› Always use a fine toothed metal
cutting blade and run the saw at
medium speeds when cutting metal.
› Use cutting oil to keep the blade cool,
increase cutting action, and prolong
the life of the blade.
› Do not twist or bend the saw blade. Let
it cut at its own speed.
Warning: Always clamp the work
piece in a vise, or to a workbench
or table. Do not hold work piece in
your hand.
Warning: Never use gasoline as a
lubricant or as a cleaning agent. A
spark from the motor may cause
an explosion. Gasoline will also
damage the plastic components of
the saw.
!
!