Spot-on General Titanium Series, Инструкция по эксплуатации

Страница: 9 / 24

9
POWER SUPPLY
• The instrument is supplied with two 1.5v AAA alkaline batteries .
To replace batteries, remove the battery door at the back of the
device. Place batteries according to polarity and replace battery
door.
OPERATION
On/off
• Press and hold the
read button to turn the laser distance
measurer on.
• Press and hold the off / clear button for 3 seconds to turn the
unit off. The device will shut off automatically after 150 seconds
without use.
Unit setting
• The unit default setting is 0.000m. To reset the current unit
of measurement press and hold the r eference point / unit of
measurement button.
• Press and hold the r eference point / unit of measurement button
to cycle through the unit of measurement options.
USING YOUR LASER MEASURER
OPTIONAL UNITS
Length Area Volume
0.000m 0.000m
2
0.000m
3
0.00m 0.00m
2
0.00m
3
0.0in 0.00ft
2
0.00ft
3
0.00ft 0.00ft
2
0.00ft
3
0 1/16 in 0.00ft
2
0.00ft
3
0'00' 1/16" 0.00ft
2
0.00ft
3