Spot-on General A3 PRO, Инструкция по эксплуатации

Страница: 13 / 20

13
Using Your Remote
‣ Ensure the unit is turned on and the laser is rotating.
‣ Press the speed control button to increase or decrease the speed of
the lasers rotation.
‣ To focus the laser beam between two points press the scanning mode
button. Pressing the button multiple times will adjust the angle of the beam.
‣ Press the clockwise or counter clockwise button to change the
rotation of the laser head while the laser is in scan mode.
‣ To create slopes or grades press the manual / automatic mode button
to enter into manual mode. The Y-axis up and Y-axis down and the
X-axis left or X-axis right buttons allow adjustment of the tilting angle.