22
9. DISPLAY COMPUTER
Display Functions
Service
Top Display:
SPEED Current Speed in km/h
Lower Display:
(Alternating; the small arrow below informs
about the currently displayed parameter.)
ODO
Total Distance
TIME
Duration of Current Trianing Session
CAL
Approximate Calories (kcal) Burned in Current Ses-
sion
DIST
Distance Traveled in Current Training Session
SCAN Parameters for the Current Training Session
Start
The computer turns on automatically as soon as it receives a signal from the
pedals' cadence sensor.
• You can also turn on the computer by briefly pressing the red button
Stop
The computer will turn off automatically if it does not receive a signal from the
sensor for four minutes.
Default Settings
• To reset values for current training session (TIME, CAL, DIST; lower display):
Press red button for 4 seconds.
• The total distance traveled (ODO) is reset when the batteries are removed.
Setting for
Lower Display
• Briefly press the red button several times until the small arrow points to the
desired parameter.
• To change the display, briefly press the red button several times until the small
arrow points to 'SCAN'.
• If the display is dim or non-existent, check that the batteries/rechargeable batteries are inserted cor-
rectly and have sufficient charge.
• The display training computer generates a Bluetooth radio signal which can be processed by a paired
Bluetooth receiver (see "App" section).
• The display training computer receives its signal from the sensor via a wired connection (see the "As-
sembly" section). If no speed is displayed when pedaling, check the cable connection.
Further Information
